Natural gas is an efficient and effective way to heat a home, but it demands respect. In 8 years as an HVAC tech in DFW, I've responded to more than a few close calls — gas leaks, carbon monoxide events, cracked heat exchangers — and I want every family in our service area to know the warning signs and safety practices that keep everyone safe. This post is my complete gas furnace safety guide for DFW homeowners.
I'm Omar Jacobo, EPA 608 Universal Certified, co-owner of Frosty's HVAC LLC (TACLA126718E). If your home has a gas furnace, read this post before heating season begins.
What Are the Main Gas Furnace Safety Risks?
The main safety risks of a gas furnace are carbon monoxide (CO) leaks, natural gas leaks, fire from incomplete combustion, and electrical hazards from failing components. Each one is serious, and each one is preventable with proper maintenance and awareness.
The four main risks explained:
Risk 1: Carbon Monoxide Leaks
Carbon monoxide is a colorless, odorless, tasteless gas produced by incomplete combustion. Your furnace produces it as a normal byproduct of burning natural gas, and a healthy furnace vents 100% of the CO outside through the flue. CO becomes dangerous when something breaks:
- Cracked heat exchanger (the metal wall separating combustion gases from your breathing air)
- Blocked or damaged flue pipe (so exhaust spills back into the home)
- Improper combustion (dirty burner, wrong gas/air mix)
- Backdrafting (negative house pressure pulls exhaust down the flue)
The EPA reports over 400 CO deaths per year in the US and over 100,000 ER visits. This is the #1 gas furnace safety concern.
Risk 2: Natural Gas Leaks
Natural gas is odorless in its natural state, but utilities add mercaptan (the "rotten egg" smell) so leaks are detectable. Gas can leak at:
- Pipe connections (especially old threaded joints)
- The gas valve on the furnace
- The flexible connector to the furnace
- The main shutoff valve
- Underground service lines (utility responsibility, but homeowner can smell the effect)
A gas leak is an immediate evacuation situation. If you smell gas, leave the house and call 911 or Atmos Energy (866-322-8667) from outside.
Risk 3: Fire Hazards
Incomplete combustion can allow unburned gas to accumulate, creating a delayed ignition event — a small explosion when the gas finally ignites. This stresses the heat exchanger, damages the burner, and in extreme cases can cause house fires. Keeping burners clean and combustion tuned prevents this.
Risk 4: Electrical Hazards
Modern furnaces have dozens of electrical components — control boards, motors, ignitors, sensors, relays. Failing wiring can cause short circuits, melted components, or in rare cases electrical fires. This is one reason annual inspections include checking wiring and connections.
How Do I Know if My Furnace Is Leaking Carbon Monoxide?
You know your furnace is leaking carbon monoxide when a CO detector alarms, when family members have flu-like symptoms that improve outside the home, or when a professional combustion analysis shows elevated CO in the supply air. You will not smell it or see it — that's why detectors are mandatory.
Warning signs to watch:
Equipment signs:
- Yellow, orange, or flickering burner flame (should be steady blue)
- Soot streaks around the furnace or flue pipe
- Rust on the cabinet or flue
- Excess condensation on interior windows when the furnace runs
- Sharp chemical smell when heating (not gas smell — different issue)
Human signs:
- Headaches that go away when you leave the house
- Dizziness, nausea, confusion during heating season
- Flu-like symptoms without a fever
- Multiple family members feeling unwell at the same time
- Unusual drowsiness or fatigue when the furnace runs
Detector signs:
- Any alarm from a CO detector (even brief)
- Detector that chirps or signals low battery repeatedly
Related: Carbon Monoxide & Your Furnace: DFW Family Safety Guide.
Where Should I Install Carbon Monoxide Detectors?
Install one CO detector on every floor of your home and within 10 feet of every bedroom door. This is the baseline minimum. More detectors are better, not worse.
Proper placement rules:
- One per floor (minimum)
- Within 10 feet of every bedroom
- 5 feet off the floor (CO distributes evenly in air)
- At least 15 feet from gas appliances (prevents nuisance alarms)
- At least 10 feet from bathrooms with showers (humidity false alarms)
- Away from direct airflow from supply registers
- Not inside closets or behind curtains
What to buy:
- Any UL 2034 certified detector
- Combination smoke/CO units work fine
- 10-year sealed battery models save on battery changes
- First Alert, Kidde, or Nest brands are reliable
Replace every 7-10 years. Check the manufacture date on the back — not the battery replacement date. CO sensors degrade over time.
What Should I Do if My CO Detector Alarms?
If your carbon monoxide detector alarms, get everyone outside immediately, call 911 from outside, and do not re-enter until the fire department clears the home. Then call (469) 254-0548 for furnace inspection and repair. This is the exact sequence.
The steps in order:
- Get everyone out. Every person, every pet. Leave the door open for ventilation.
- Call 911 from outside. The fire department has calibrated CO meters to confirm levels and find the source.
- Do not re-enter even if you feel fine. CO poisoning can have delayed effects.
- Wait for clearance from fire department before going back inside.
- Call Frosty's at (469) 254-0548 after the scene is cleared to inspect and repair the furnace. Same-day service for CO incidents.
Do not:
- Try to find the source yourself
- Open windows and "wait it out"
- Assume the detector is wrong (even brief alarms should be taken seriously)
- Reset the detector and keep using the furnace
What Should I Do if I Smell Gas?
If you smell gas in your home, leave immediately — do not use light switches, do not use your phone inside, do not try to find the source. Call 911 or Atmos Energy at 866-322-8667 from outside. A gas leak is an emergency, not a diagnostic call.
The steps in order:
- Leave the house immediately with everyone inside.
- Do not turn anything on or off — no light switches, no appliances, no phones inside.
- Once outside, call 911 or Atmos Energy at 866-322-8667 (Atmos is the gas utility for most of DFW).
- Wait for utility and emergency response before re-entering.
- Call Frosty's at (469) 254-0548 after the gas is shut off and the home is cleared — we'll repair the source of the leak.
Light switches, phones, and any electrical spark can ignite accumulated gas. This is not overcautious — gas explosions are rare but devastating when they happen.
Related: Pre-Season Furnace Checkup: Why September Is the Best Time.
Why Do We Never Repair a Cracked Heat Exchanger?
We never repair a cracked heat exchanger because welding or patching creates weak spots that will fail again, and the consequences of a failed repair are carbon monoxide poisoning. This is a hard safety rule. I covered the full reasoning in my cracked heat exchanger post, but the short version is: if the exchanger is cracked, the furnace is done. Full HVAC system replacement ($8,000-$20,000+).
If any contractor offers to weld, braze, or patch a cracked heat exchanger, walk away. Get a second opinion from a licensed technician. I'd rather lose the job than put my name on a repair that could kill your family.
How Often Should a Gas Furnace Be Inspected?
A gas furnace should be professionally inspected once per year, in the fall before heating season. Annual inspections catch safety issues before they become emergencies. Our fall tune-up is $150 (Member: $127.50) and includes 14 distinct safety and performance checks.
What a real inspection includes:
- Combustion analysis (CO, CO2, O2 in flue gas)
- Heat exchanger inspection (visual + borescope)
- Flue draw test
- Ambient CO reading at supply registers
- Burner flame and gas pressure check
- Safety switch tests (limit, rollout, pressure)
- Blower motor amp draw
- Filter replacement
- Written report
See my annual furnace inspection post for the full 14-point breakdown.
Frosty Club Premium ($300/year) includes two tune-ups per year — spring AC and fall furnace — plus $500 off any repair, 15% off parts, priority scheduling, and no overtime charges. For tune-up customers, Premium membership pays for itself on the two inspections alone.
Schedule Your Gas Furnace Safety Inspection
Don't wait for a warning sign to think about furnace safety. Book a fall tune-up before the first freeze — I'd rather find a problem in September during a $150 inspection than 3 a.m. during a January freeze.
Call (469) 254-0548 or request service online.
Serving Farmers Branch, Coppell, Irving, Flower Mound, Lewisville, and Grapevine.
Considering replacement? See real pricing. Save on every service — join Frosty Club. Meet the family behind Frosty's.
143 Google reviews, 4.9 stars, TACLA126718E, since 2018.
Related Articles
- Carbon Monoxide & Your Furnace: DFW Family Safety Guide
- Pre-Season Furnace Checkup: Why September Is the Best Time
- What Is a Heat Exchanger and Why Should You Care?
Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Family-owned since 2018, 143 Google reviews at 4.9 stars, Texas License TACLA126718E. Serving DFW homeowners with flat-rate pricing and no surprises.